Create a combined library

 

For certain Agilent Catalog libraries, you can add baits for additional regions. To do this, you create a combined library. A combined library contains a base library and a supplemental library:

You use the Create Combined Library wizard to create a combined library. Combined libraries have certain limitations. See the note at the end of this topic.

Before you create a combined library

To start the Create Combined Library wizard

  1. Set the application type to SureSelect Target Enrichment.

  2. In the Home tab of the Workspace tab, under Library Wizards, select Create Combined Library, then click Next.

    The Create Combined Library wizard appears in a new window. Initially, the first step of the wizard appears. The steps of the wizard are described in the sections below.

Step 1 – Define Library

  1. Enter the following library properties, as appropriate. All properties are required, except as noted.

Property

Instructions/Details

Library Name

Type a name for the combined library. eArray uses this name as a search key, and as a way to refer to it in search results, lists, and the like. The library name cannot have the same name as an existing Agilent Catalog library.

Base Library Name

Select the desired base library. The names of the Agilent Catalog libraries that are available as base libraries appear in the list. After you select a base library, eArray automatically sets the Control Grid, Length, and Species to those of the selected base library.

Length

(Read-only) The number of nucleotides in each bait in the combined library. All baits in the combined library have the same length. After you select a base library, eArray sets this property automatically.

Control Grid

(Read-only) The set of Agilent quality control baits that is included in the base library. The name of the control grid appears as a link. After you select a base library, eArray sets this property automatically. To see additional information about the control grid, click the link.

Library Size

(Read-only) Currently, eArray supports bait libraries with a size of 1 X 55K, which can contain up to 57,750 baits, including the required Agilent quality control baits.

Description

(Optional) Type a brief description of the combined library. This information is saved with the library.

Folder

Select the desired destination folder for the combined library. The folders to which you have access appear in the list.

Keywords

(Optional) Type a keyword, or multiple keywords separated by commas. Keywords can make your library easier to find in a library search, or when you browse libraries by category.

Species

(Read-only) The species associated with the baits in the library. After you select a base library, eArray automatically sets the species to that of the selected base library

Comments

(Optional) Type brief comments to be saved with the library.

Attachment

(Optional) Attachments are files or links that are related your library. Attached files can be up to 32 MB in size. To add one or more attachments, follow these steps:

  1. Click .
    A page appears in a new window.

  2. In the Attach pane, enter the following:

  3. Name – Type a name for the attachment. This name becomes the link that you click to access the attachment.

  4. Type – Select the desired type of attachment from the list. An attachment can be either a file or a URL.

  5. Locale – Select the appropriate locale from the list. eArray uses this option to select content that has been localized for your region, when it is available.

  6. File – (Available only if you selected File for the type of attachment) Click Browse. Select the desired attachment in the dialog box that appears, then click Open.

  7. URL – (Available only if you selected URL for the type of attachment) Type the full URL of the Internet resource, including the protocol specifier. For example, http://www.agilent.com.

  1. Click Add.
    The attachment appears in the Attachment Header List at the top of the window. A success message appears.

  2. Click Close.

  3. Add additional attachments, if desired.
    If you add an attachment in error, select the check box next to its name in the Attachment Header List, then click Remove.

  4. Click Done.
    The window closes. The names of your attachments appear as links in Attachment.

  1. Click Next.

    The next step of the wizard appears.
     

Step 2 – Select Supplemental Library

In this step of the wizard, you select a supplemental library to add to the selected base library. Under Select Supplemental Library, in the Search Results pane, a list of available supplemental libraries appears. This list contains the supplemental libraries that are specifically linked to the base library that you selected in the first step of the wizard.

  1. Mark the desired supplemental library. You can select one supplemental library.

  2. Click Next.

    The next step of the wizard appears.
     

Step 3 – Layout Baits

In this step of the wizard, you confirm your selections of the base and supplemental libraries to be included in the combined library.

  1. Inspect the details that appear in this step of the wizard. All details are read-only, and are described in the table below.

Detail

Description

Base Library Details

Name

The name of the base library that will be included in the combined library. A combined library contains exactly one base library.

ELID

The Agilent ID number of the selected base library. To see more information about the selected base library, click the ELID. The View Library page appears in a new window.

Folder

The location of the base library. Currently, base libraries are always found in the AgilentCatalog folder.

Supplemental Library Details

Name

The name of the supplemental library that will be included in the combined library. You include one supplemental library in a combined library.

ELID

The Agilent ID number of the selected supplemental library. To see more information about the selected supplemental library, click the ELID. The View Library page appears in a new window.

Folder

The location of the supplemental library.

  1. If you need to change your selection of supplemental library, click Back. Otherwise, click Next.

    The next step of the wizard appears.
     

Step 4 – Create Library

In this step of the wizard, you select a status for the combined library, and create the library.

  1. Select one of these options:

  2. Complete – The library will be saved with a status of Complete to the location that you selected. Libraries with this status cannot be edited. Later, you can submit the library to Agilent Manufacturing and subsequently request a quote.

  3. Submitted – The library will be saved with a status of Submitted to the location that you selected. Libraries with this status cannot be edited or deleted. In addition, eArray submits the library to Agilent Manufacturing, which makes the library available for price quotes.

  1. Do one of the following:

  2. If you selected a status of Complete, follow these steps:

    1. Click Save.
      A message tells you that the combined library has been successfully created.

    2. Click Close.
      A message tells you that the library was successfully created.

  3. If you selected a status of Submitted, follow these steps:

    1. Click Design Checklist.
      The design checklist for SureSelect Target Enrichment libraries appears.

    2. Read and mark all of the items on the checklist, then click Done.

    3. Click Save.
      eArray saves the combined library to the location that you selected, and also submits the library to Agilent Manufacturing.
      A message tells you that the combined library was successfully created.

  1. Click Close.

    A message tells you that the library was successfully created.

  2. Click Close.

    A message tells you that a file write is in progress.

  3. Click Close.

    The View Library page appears in a new window with information about the new combined library.

See also

Create a supplemental library

Bait tiling